Weekly Timer Setting \ 05 Timer Interrupt Password Set - Oce CS655 Pro Administrator's Manual

Machine administrator setting
6.2.7

03 Weekly Timer Setting \ 05 Timer Interrupt Password Set

Use this password setting mode to establish a four-digit password required for using the Timer Interrupt
function.
1
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen.
2
Touch [01 System Setting], [03 Weekly Timer Setting], and then [05 Timer Interrupt Password Set].
3
Use the touch panel keypad to enter a four-digit password.
4
Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the Weekly Timer Setting Menu Screen will be restored.
5
If further changes are required, touch the desired key.
Note
When the password setting is 0000, Timer Interrupt can be used simply by pressing [Power Save] on
the control panel, then on. In this case, you will be asked to enter the duration of use (a period of time
to turn the machine power on).
CS655 Pro
6
6-13