Table of Contents
Advertisement
If the copier is not equipped with the Editor, only
"Color Wheel " and "Registered Color" can be
selected.
5.
Select a color.
There are four methods for selecting a color.
Select a color from the color palette.
(Color Palette Selection) (See p. 1-65.)
Select a color from the original.
(Designated Color Selection) (See p. 1-67.)
Select a color that was previously registered.
(Registered Color Selection) (See p. 1-69.)
Select a color from the color wheel.
(Color Wheel Selection) (See p. 1-70.)
When a color is selected the "Color Filter" is set, and the screen shows the
display in step 1.
6.
Press the OK key.
The Color Creation setting process is complete.
COLOR FILTER
is displayed.
The copier is now ready to make copies.
Color Creation
1-39
Advertisement
Table of Contents
