Color Conversion - Oce Color System 200 Operator's Manual

Color Conversion (Changing a Specific Color in the Original to a Different Color)
For details on how to program the basic copy
settings, see p. 2-4 of chapter 2 "Basic Copying" in
the Basic Operations Manual.
For details on the Color Selection Flow, see
"Color Selection Flow (Selecting Colors within
Settings for Each Function)," on p. 1-63.
If the C key is pressed, the screen returns to
the standard display.
If the C key is pressed, the screen returns to
the display in step 2.
Designate a color with the edit pen as shown in
the illustration.
Color Creation
1-56
Use this mode to change a specific color on an original to a different color
on copies.
1.
Place the original face up on the Editor, aligning the
original with the V mark.
2.
Color
Press the Creation key.
3.
Press the COLOR CONVERSION key.
4.
Using the edit pen, press one point in an area on the
original consisting of the color that is to be converted.