Color Wheel Selection (Selecting A Color From The Color Wheel) - Oce Color System 200 Operator's Manual

Color Wheel Selection (Selecting a Color from the Color Wheel)

If the C key is pressed, the screen returns to
the color selection screen for each function.
If fine adjustments to a color from the color
wheel are made, then even if the same color is
selected to be used for another mode, that color is
automatically set to the fine adjusted color.
Color Selection Flow (Selecting Colors within Settings for Each Function)
1-70
Select a color from the color wheel shown in the display.
Perform the following steps from the color selection screen for each
function.
1.
Press the COLOR WHEEL key.
2.
Press the key for the color to be selected.
If necessary, press either the + key or the – key to adjust the color.
3.
Press the OK key.
The color selection process is now complete.