Values can be set between 1 and 999. If the
value is set 400 or above, the setting automatically
becomes 400%. If the value is set to 25 or below,
the setting automatically becomes 25%.
If the 1:1 key is pressed, the copy ratio is set
to 1:1 (100%).
If the AUTO key is pressed, the size of the
insertion original is automatically changed using the
same copy ratios in to the background original.
For Transparent Image, the rate of composition
is also set.
Color In Color (Combining Color Images)
4-44
9.
Press the OK key.
10.
Set the copy ratio.
Auto Zoom is normally selected. The numeric keys can be used to enter
any desired copy ratio.
11.
Press the OK key.
12.
Place the original from which the image is to be
extracted on the platen glass.
Place the original face down and align it with the V mark on the platen
glass, being careful not to change the top-bottom orientation of the original.
13.
Press the SCAN key.