Oce Color System 200 Operator's Manual page 63

7.
Select a color.
There are four methods for selecting a color.
Select a color from the color palette.
(Color Palette Selection) (See p. 1-65.)
Select a color from the original.
(Designated Color selection) (See p. 1-67.)
Select a color that was previously registered.
(Registered Color selection) (See p. 1-69.)
Select a color from the color wheel.
(Color Wheel selection) (See p. 1-70.)
8.
Press the OK key.
9.
Continue the Coloring setting, or end the Coloring
setting process as necessary.
To continue and set Coloring setting process
1. Select the object for coloring.
2. Select the point(s).
3. Select the color.
To end the Coloring setting process
Press the OK key.
Color Creation
1-51