The More Connections Screen - ZyXEL Communications VMG1312-T10C User Manual

5.3 The More Connections Screen

The Device allows you to configure more than one Internet access connection. To configure
additional Internet access connections click Network Setting > Broadband > More
Connections. The screen differs by the encapsulation you select. When you use the Broadband >
Internet Connection screen to set up Internet access, you are configuring the first WAN
connection.
Figure 21 Network Setting > Broadband > More Connections
The following table describes the labels in this screen.
Table 5 Network Setting > Broadband > More Connections
LABEL
#
Active
Node Name
VPI/VCI
Encapsulation
Modify
VMG1312-T10C User's Guide
DESCRIPTION
This is an index number indicating the number of the corresponding connection.
This field indicates whether the connection is active or not. This field is read-only.
This is the name of the Internet connection.
This field displays the Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI)
numbers configured for this WAN connection.
This field indicates the encapsulation method and multiplexing type the Internet
connection uses.
The first (ISP) connection is read-only in this screen. Use the Broadband > Internet
Connection screen to edit it.
Click the Edit icon to edit the Internet connection settings. Click this icon on an empty
configuration to add a new Internet access setup.
Click the Remove icon to delete the Internet access setup from your connection list.
Chapter 5 WAN Setup
45