Add New Entry/Modify Mac Filtering Profile; Layer-2 Isolation Overview - ZyXEL Communications SBG3500-N000 User Manual

14.5.1 Add New Entry/Modify MAC Filtering Profile

This screen allows you to create a new MAC filtering profile or edit an existing one. To access this
screen, click the Add New Profile button or select a MAC filter profile from the list and click the
Modify button.
Figure 112 Network Setting > AP Profile > MAC Filtering > Add New Profile/Modify
The following table describes the labels in this screen.
Table 79 Network Setting > AP Profile > MAC Filtering > Add New Profile/Modify
LABEL
Profile Name
Filter Action
Add New
Entry
#
MAC
Description
Modify
Apply
Cancel

14.6 Layer-2 Isolation Overview

When Layer-2 isolation is enabled, it prevents connected devices from communicating with each
other in the SBG3500-N Series's local network(s).
Layer-2 isolation only checks the wireless traffic that goes through the SBG3500-N Series
interfaces, such as the virtual interface and the bridge interface. between the 2.4 and 5 GHz
WLAN. T
Chapter 14 AP Profile
DESCRIPTION
Enter up to 31 alphanumeric characters for the profile name. This name is only visible in the
Web Configurator and is only for management purposes. Spaces and underscores are
allowed.
Select allow to permit the wireless client with the MAC addresses in this profile to connect to
the network through the associated SSID; select deny to block the wireless clients with the
specified MAC addresses.
Click this to add a MAC address that is associated with the MAC Filtering Profile's list. You can
add up to 128 entries in this profile.
This field is a sequential value, and it is not associated with a specific profile.
Enter a MAC address that is associated with this MAC Filtering Profile.
Enter This field displays a description for the MAC address associated with this profile. You can
click the description to make it editable. Enter up to 60 characters, spaces and underscores
allowed.
Click the Edit icon to edit the MAC filtering profile.
Click the Delete icon to delete a MAC filtering profile. Note that subsequent MAC filtering
profile moves up by one when you take this action.
Click Apply to save your changes back to the SBG3500-N Series.
Click Cancel to exit this screen without saving your changes.
SBG3500-N Series User's Guide
240