Table of Contents
Advertisement
Figure 37 LAN and WAN IP Addresses
The LAN parameters of the EMG2881-T20A are preset in the factory with the following values:
• IPv4 address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits)
• DHCP server enabled with 128 client IPv4 addresses starting from 192.168.1.33.
These parameters should work for the majority of installations.
8.4 LAN IP Screen
Use this screen to change the IP address for your EMG2881-T20A. Click Configuration > LAN > LAN IP.
Figure 38 Configuration > LAN > LAN IP
The following table describes the labels in this screen.
Table 29 Configuration > LAN > LAN IP
LABEL
IP Address
IP Subnet Mask
Chapter 8 LAN
DESCRIPTION
Type the IP address of your EMG2881-T20A in dotted decimal notation.
The subnet mask specifies the network number portion of an IP address. Your EMG2881-T20A
will automatically calculate the subnet mask based on the IP address that you assign. Unless
you are implementing subnetting, use the subnet mask computed by the EMG2881-T20A.
EMG2881-T20A User's Guide
71
Advertisement
Table of Contents
