Table of Contents
Advertisement
Chapter 6 Broadband
6.2.1 Add/Edit Internet Connection
Click Add new WAN Interface in the Broadband screen or the Edit icon next to an existing WAN
interface to configure a WAN connection. The screen varies depending on the interface type, mode,
encapsulation, and IPv6/IPv4 mode you select.
6.2.1.1 Routing Mode
Use Routing mode if your ISP give you one IP address only and you want multiple computers to
share an Internet account.
The following example screen displays when you select the ADSL over ATM connection type,
Routing mode, and PPPoE encapsulation. The screen varies when you select other interface type,
encapsulation, and IPv6/IPv4 mode.
Figure 20 Routing Mode
The following table describes the labels in this screen.
Table 8 Routing Mode
LABEL
General
Active
Name
Type
80
DESCRIPTION
Select this to activate the WAN configuration settings.
Specify a descriptive name for this connection.
Select whether it is an ADSL/VDSL over PTM, ADSL over ATM connection or Ethernet.
VMG1312-B10B / VMG1312-B30B Series User's Guide
Advertisement
Table of Contents
