Table of Contents
Advertisement
29 Save/Recall
The T3DSO2000A supports saving setups, reference waveforms, screenshots, and
waveform data files to internal storage or external USB storage devices (e.g. U disk).
Saved setups and reference waveforms can be recalled as needed.
29.1
Save Type
The T3DSO2000A supports save types: Setup, Reference, Image (*.bmp/*.jpg/*.png),
Waveform Data (binary/csv/matlab). It also supports saving the current setup as default
setting.
Here are brief descriptions of save types:
Setup
This is the default file save type of the oscilloscope. Setups can be saved into internal or
external memory with the *.xml file extension. Up to 10 setup files can be stored in the
internal memory (No.1 - No.10).
Reference
The reference waveform data are saved to external memory with the *.ref file extension.
The saved file contains the reference waveform data and its setup information such as
the vertical scale, vertical position, and timebase.
BMP
Saves the screenshot to external memory in *.bmp format.
JPG
Saves the screenshot to external memory in *.jpg format.
PNG
Saves the screenshot to external memory in *.png format.
Binary Data
Saves the waveform data to external memory in binary (*.bin) format.
CSV Data
Saves the waveform data to the external memory in ".csv" format. After selecting this
type, you can touch the ParaSwitch to determine to include the scope configuration
parameter information (horizontal timebase, vertical scale, etc.) or not.
Matlab Data
Saves the waveform data to external memory in *.dat format which can be imported by
Matlab directly.
1.800.561.8187
information@itm.com
www.
.com
T3DSO2000A Manual. Page 178
Advertisement
Table of Contents
