Enabling Network Separation - Polycom Collaboration Server (RMX) 1500 Deployment Manual

RealPresence Collaboration Server (RMX) 1500/2000/4000 Deployment Guide for Maximum Security Environments

Enabling Network Separation

IP Endpoints
Figure 2
To enable network separation:
1
2
3
4
5
6
7
8
9
10 Click the Routers tab.
11 Enter the Default Router IP Address.
12 Click the OK button.
13 Connect a workstation that is connected to the Management LAN to the RMX's LAN 3
1-60
LAN 2 Port - Signaling
RMX
Signaling and Management Network Separation
On the RMX menu, click Setup > System Configuration.
The System Flags dialog box is displayed.
Locate and double-click on the SEPARATE_MANAGEMENT_NETWORK System
Flag entry.
The Update Flag Name dialog box is displayed.
In the New Value field, enter YES.
Click the OK button to close the Update Flag Name dialog box.
Click the OK button to close the System Flags dialog box.
In the Reset Confirmation dialog box, click No.
In the Collaboration Server Management pane, click the IP Network Services (
In the IP Network Services list pane, right-click the Management Network (
and select Properties.
Enter the Control Unit IP, Shelf Management IP and Subnet Mask addresses in their
respective field boxes.
A Reset Confirmation dialog box is displayed.
port.
LAN 3 Port - Management
RMX Web Client / RMX Manager
Management Sessions
) button.
) entry
Polycom, Inc.