Modifying Flag Values - Polycom Collaboration Server (RMX) 1500 Deployment Manual

RealPresence Collaboration Server (RMX) 1500/2000/4000 Deployment Guide for Maximum Security Environments
Table 1-18
Flag
PASSWORD_EXPIRATION
_DAYS
PASSWORD_EXPIRATION
_WARNING_DAYS
PASSWORD_HISTORY_SI
ZE
SESSION_TIMEOUT_IN_MI
NUTES
USER_LOCKOUT
USER_LOCKOUT_DURATI
ON_IN_MINUTES
USER_LOCKOUT_WINDO
W_IN_MINUTES

Modifying Flag Values

System security can be further strengthened by modifying the default flag values. These
modified values are applied to the system when the ULTRA_SECURE_MODE System Flag
is set to YES.
1-58
System Flags and their default values
Determines the number of days that passwords
remain valid.
Default: 60
Range: 7-90
Determines how many days before password
expiration a warning of pending password expiration
will be displayed to the users.
Default: 7
Range: 7-14
Determines how many previous passwords are
recorded to prevent users from re-using previous
passwords. The list is cyclic, with the most recently
recorded password causing the deletion of the oldest
recorded password.
Default: 10
Range: 10-16
The number of minutes after which, if there is no input
from the user, the user's connection to the RMX is
terminated.
Default: 10
Range: 1-999
When this flag is set to YES, a user is locked out of
the system after three consecutive Login failures with
same User Name. The user is disabled and only the
administrator can enable the user within the system.
Default: YES
Determines the time period during which three
consecutive Login failures occur that will result in the
user being locked out.
Default: 0
Range: 0-480
Determines the time period for which the user is
locked out.
Default: 60
Range: 0-45000
Description
Recommended
Value
60
7
10
10
YES
0
60
Polycom, Inc.