Polycom Collaboration Server (RMX) 1500 Deployment Manual page 44

RealPresence Collaboration Server (RMX) 1500/2000/4000 Deployment Guide for Maximum Security Environments
21 Click Next.
22 Define the following parameters:
1-38
Table 1-12 Fast Configuration Wizard – PRI Settings (Continued)
Field Description
Num Plan Select the type of signaling (Number Plan) from the list according to
information given by the service provider.
Default: ISDN
Note: For E1 spans, this parameter is set by the system.
Net Specific Select the appropriate service program if one is used by your service
provider (carrier).
Some service providers may have several service programs that can be
used.
Default: None
Dial-out Prefix Enter the prefix that the PBX requires to dial out. Leave this field blank if
a dial-out prefix is not required.
The field can contain be empty (blank) or a numeric value between 0 and
9999.
Default: Blank
The Span Definition dialog box is displayed.
Table 1-13 Fast Configuration Wizard – Spans Definition
Field Description
Framing Select the Framing format used by the carrier for the network interface
from the list.
•
•
For T1 spans, default is SFSF.
For E1 spans, default is FEBE.
Polycom, Inc.