Table of Contents
Advertisement
First Time Installation and
Configuration
Do not insert a USB device into the RMX's USB port unless it is your intention to disable Secured
Mode or perform a Comprehensive Restore to Factory Defaults.
Workstation Requirements
The RMX Web Client and RMX Manager applications can be installed in an environment that
meets the following requirements:
•
•
•
•
•
.Net Framework 2.0 is required and installed automatically.
The RMX must be installed on the intranet or added to the trusted sites list. In both cases, the
ActiveX control will install properly.
Management of the RMX using the RMX Web Client requires the installation of ActiveX. In
deployments were ActiveX is prohibited, administrators must use the RMX Manger.
For users deploying a RMX Serial Gateway S4GW, the VIEW_RVGW_ACTIVEX System Flag can
be added and its value modified to determine if ActiveX controls are used to display the RMX Serial
Gateway S4GW web site. If the flag value is set to NO (default) an external Internet Explorer
browser is launched to display the RMX Serial Gateway S4GW web site.
For more information see the RealPresence Collaboration Server (RMX) 1500/2000/4000
Administrator's Guide for Maximum Security Environments "ActiveX Bypass" on page 17-89.
Required IT Infrastructure
The following IT infrastructure components are required to secure the RMX conferencing
(audio and video) solution.
Polycom, Inc.
Minimum Hardware – Intel® Pentium® III, 1 GHz or higher,
1024 MB RAM, 500 MB free disk space.
Workstation Operating System – Microsoft® Windows® XP, Vista®.
Network Card – 10/100 Mbps.
Web Browser – Microsoft® Internet Explorer® Version 6 or higher.
FIPS – Is always enabled in Ultra Secure Mode, and when ClickOnce is used to install
RMX Manager, the workstation must have one of the following installed:
— .NET Framework 3.5 or a later version of the .NET Framework.
— .NET Framework 2.0 plus Service Pack 1 or later.
1
1-1
Advertisement
Table of Contents
