Table of Contents
Advertisement
2
3
Installing the RTM ISDN 1500 Card
1
2
A Software License is included with the ISDN card. This license must be registered as part of
the Product Registration and Product Activation process.
Mounting the Collaboration Server 1500 in a Rack
There are two methods for installing the Collaboration Server in a 19" rack:
•
Polycom, Inc.
Remove the cover by unscrewing the captive screws that fasten the card to the MCU.
Slide out the cover.
Slide in the RTM ISDN 1500 card.
Insert the card into the slot and tighten the captive screws on each side of the rear panel
of the card, securing the RTM ISDN card to Collaboration Server.
Using the rack rail runners on the RMX 1500
— Install the telescopic rail runners, as described in "Installing the Telescopic Rail
Runners on the Rack" on page 1-5.
— Mount the Collaboration Server 1500 on top of the rail runners.
Chapter 1-First Time Installation and Configuration
1-9
Advertisement
Table of Contents
