Polycom Collaboration Server (RMX) 1500 Deployment Manual page 45

23 Click Next.
24 Click Add to define dial-in number ranges.
Polycom, Inc.
Table 1-13 Fast Configuration Wizard – Spans Definition
Field Description
Side Select one of the following options:
•
•
•
Note: If the PBX is configured on the network side, then the
Collaboration Server unit must be configured as the user side, and vice
versa, or both must be configured symmetrically.
Line Coding Select the PRI line coding method from the list.
•
•
Switch Type Select the brand and revision level of switch equipment installed in the
service provider's central office.
•
•
Note: For T1 configurations in Taiwan, Framing must be set to ESF and
Line Coding to B8ZS.
The Phones dialog box is displayed.
The Add Phone Number dialog box is displayed.
User side (default)
Network side
Symmetric side
For T1 spans, default is B8ZS.
For E1 spans, default is HDB3.
For T1 spans, default is AT&T 4ESS.
For E1 spans, default is EURO ISDN.
Chapter 1-First Time Installation and Configuration
1-39