Procedure 13: Configure White List Access - Polycom Collaboration Server (RMX) 1500 Deployment Manual

RealPresence Collaboration Server (RMX) 1500/2000/4000 Deployment Guide for Maximum Security Environments
4

Procedure 13: Configure White List Access

For security reasons it is important that a list of devices permitted to connect to the RMX is
configured. The White List contains the addresses of all IP devices permitted to connect to
the RMX.
To view or modify the White List:
1
2
3
1-68
Click the OK button.
In the RMX Management pane, click the IP Network Services.
In the IP Network Services list pane, double-click the Management Network entry.
In the Management Network Properties dialog box click the WhiteList tab.
The WhiteList dialog box is displayed.
— If there are no entries in the White List, it is disabled to prevent lock out.
— If the White List is disabled non of the IP addresses in the list are displayed.
— The Add and Remove buttons are only active if the Enable Whitelist check box is
selected.
Polycom, Inc.