Procedure 1: Hardware Installation And Setup - Polycom Collaboration Server (RMX) 1500 Deployment Manual

RealPresence Collaboration Server (RMX) 1500/2000/4000 Deployment Guide for Maximum Security Environments

Procedure 1: Hardware Installation and Setup

In a well ventilated area, mount the RMX 1500/RMX 2000/RMX4000 unit in a 19" rack. It is
important to adhere to the Site Requirements as described in the RMX 2000/4000 Hardware
Guides, "Site Requirements" on page 1-3.
To maximize conferencing performance, especially in high bit rate call environments, a 1Gb
connection is recommended for all RMX types.
The following procedures have to be performed to install the RMX System in your site:
•
•
•
1-4
Installing the RMX in a rack or as a standalone. When installing the RMX unit on a rack,
this process is done in two stages:
— Installing the telescopic rail runners on the rack. This stage is identical to all RMX
system types.
— Mounting the RMX on the rack using the previously installed rail runners
Connecting the RMX to the power source
Connecting the network (LAN and ISDN) cables to the RMX.
Polycom, Inc.