Rmx Hardware; Installation And Configuration - Polycom Collaboration Server (RMX) 1500 Deployment Manual

RMX Hardware

Version N.0 requires that MPM+ cards are installed in the RMX.

Installation and Configuration

First Time Installation and Configuration of the Collaboration Server 1500/2000/4000 consists
of the following procedures:
1
2
3
4
5
6
7
8
9
10 Modify Default Login Banner Text (if required)
11 Rename the default POLYCOM user
12 Disable Inline AutoComplete Option in Web Browser
13 Configure White List Access
Polycom, Inc.
information see Polycom® RMX® 1500/2000/4000 Administrator's Guide for Maximum
Security Environments "Certificate Configuration and Management" on page
Hardware Installation and Setup
— Mount the RMX in a rack.
— Connect the necessary cables.
Gather Network Equipment and Address Information
— Get the information needed for integrating the RMX into the local (Signaling and
Management) networks.
First Entry Configuration
— Register the RMX.
— Power up the RMX.
— Modify the Default Management Network.
— Configure the Signaling Network Service.
— Configure the ISDN/PSTN Network Service.
Enable Ultra Secure Mode
Enable Secured Communication
— Purchase and Install the SSL/TLS certificate
— Modify the Management Network settings
— Create/Modify the relevant System Flags
Set System Configuration Flags
Enable Network Separation (RMX 2000)
Configure 802.1x Authentication
Configure IVR Settings
Chapter 1-First Time Installation and Configuration
E-1.
1-3