Polycom Collaboration Server (RMX) 1500 Deployment Manual page 145

Step 7: Re-enable Secured Communications Mode.
Polycom, Inc.
The Hardware Monitor pane is displayed.
d Click the Reset button.
The RMX restarts. System restart can take 5 - 10 minutes, depending on the RMX's
configuration.
Using the RMX Manager:
In the MCUs list, select the RMX to be updated.
e
f Right-click in the MCUs list entry and select Connect.
g Click Accept to accept the warning banner.
Enter an administrator Username and Password.
h
i Click OK.
Using the RMX Manager:
In the RMX Management pane, click the IP Network Services button. (Depending
a
on the RMX Manager configuration, you may have to click Rarely Used first.)
b In the IP Network Services list pane, double-click Management Network.
The Management Network Properties dialog box is displayed.
c Select the Secured Communication check box.
d Click OK.
A message informs you that your session will be disconnected and that you must
re-connect the RMX using https in the browser URL.
e Click OK.
Chapter 4-Restoring the RMX Using the USB Port
4-13