Polycom Collaboration Server (RMX) 1500 Deployment Manual page 49

34 Click Next.
35 Click Next.
36 Enter the required System Flags information in the dialog box.
Polycom, Inc.
Table 1-15 Fast Configuration Wizard - Collaboration Server Time (Continued)
Field
Use NTP Server
The Administrator User dialog box is displayed.
The Administrator User Name and Password are configured in Procedure 10, after Secured
Communication has been enabled.
•
If the default POLYCOM user is defined in the RMX Web Client, an active alarm is displayed
and the MCU status changes to Major until the administrator changes the default username
and password.
•
System access is not permitted until the default password is changed.
The System Flags dialog box is displayed
Option 3: Setting the MCU time by synchronizing with external NTP
servers:
•
Select this check box to synchronize the time with up to three
external NTP servers. Once selected, you must enter the IP
address of at least one external NTP server to implement this
mode.
•
Enter the IP addresses of the required NTP servers in order of
precedence.
The Status field indicates whether registration with the NTP Server
failed or succeeded.
Notes:
•
When this option is selected, the manual GMT Date and GMT
Time setting options are disabled. The GMT Offset fields are still
active.
•
The RealPresence Server will not use a time source such as a
Windows-based, W32Time service (SNTP) time service. Only
full-featured (Stratum 16 or below) NTP Servers are considered
sufficiently reliable for high-accuracy timing environments.
Chapter 1-First Time Installation and Configuration
Description
1-43