Polycom Collaboration Server (RMX) 1500 Deployment Manual page 38

RealPresence Collaboration Server (RMX) 1500/2000/4000 Deployment Guide for Maximum Security Environments
10 Enter the required Gatekeeper information in the dialog box.
1-32
Table 1-8 Signaling Network Service – Gatekeeper Parameters
Field Description
Gatekeeper Select Specify to enable configuration of the gatekeeper IP address.
When Off is selected, all gatekeeper options are disabled.
Primary Enter either the gatekeeper's host name as registered in the DNS or IP
Gatekeeper address.
IP Address or
Name
MCU Prefix in Enter the number with which this Network Service registers with the
Gatekeeper gatekeeper. This number is used by H.323 endpoints as the first part of their
dial-in string when dialing the MCU.
When PathNavigator or SE200 is used, this prefix automatically registers
with the gatekeeper. When another gatekeeper is used, this prefix must also
be defined in the gatekeeper.
Aliases:
Alias The alias that identifies the RMX's Signaling Host within the network. Up to
five aliases can be defined for each RMX.
Note: When a gatekeeper is specified, at least one alias must be entered in
the table.
Additional aliases or prefixes may also be entered.
Polycom, Inc.