Polycom Collaboration Server (RMX) 1500 Deployment Manual page 136

RealPresence Collaboration Server (RMX) 1500/2000/4000 Deployment Guide for Maximum Security Environments
Step 4: Into the RMX's USB port, insert a USB key containing a file named
Do not insert a USB key containing a file named RestoreToFactoryDefault.txt if the USB key does
not also contain a lan.cfg file.
Step 5: Restart the RMX.
Step 6: If you are not using an RMX4000 continue with Step 9.
Step 7: Into the RMX's USB port, insert a USB key containing a file named lan.cfg file only.
Step 8: Restart the RMX.
Step 9: From the workstation, connect to the RMX's Alternate Management Network.
Step 10: Apply the Product Activation Key.
Step 11: Unplug the USB key.
Step 12: Restart the RMX.
Step 13: Restore the System Configuration from the backup by applying the backup files
Step 14: Restart the RMX.
(If the RMX is unresponsive after these procedures a further restart may be necessary.)
Step 1: Backup Configuration Files
The Software Management menu is used to backup and restore the RMX's configuration files
and to download MCU software.
To backup configuration files:
Step 2: Configure a Workstation for Direct Connection
The following procedures show how to modify the workstation's networking parameters
using the Windows New Connection Wizard.
4-4
RestoreToFactoryDefault.txt and also containing a lan.cfg file.
created in procedure Step 1.
a On the Collaboration Server menu, click Administration > Software Management >
Backup Configuration.
The Backup Configuration dialog box opens.
b Browse to the Backup Directory Path and then click Backup.
Polycom, Inc.