7
8
9
Polycom, Inc.
The New IP Service dialog box is displayed.
In the IP tab:
a
Enter an IP Network Service Name.
b
Enter a Signaling Host IP Address that is on the same VLAN as the Serial Gateway
Management address.
c
Enter a Media Card 2 Port 1 IP Address that is on the same VLAN as the Serial
Gateway Management address.
Click the Routers tab.
Enter a Default Router IP Address that is on the same VLAN as the Serial Gateway
Management address. (This address was configured in Step 3 of "Procedure 1: Initial Setup
Chapter 5-Deploying a Polycom RMX™ Serial Gateway S4GW
5-9