Conference Control Using Dtmf Codes - Polycom Collaboration Server (RMX) 1500 Deployment Manual

Conference Control Using DTMF Codes

Participants and chairpersons can manage their connection to ongoing conferences from
their endpoints, using touch-tone signals (DTMF codes) from their endpoints. Table 3-9 lists
the DTMF Codes that can be used.
Chairpersons can also control an ongoing conference using DTMF codes.
Permissions for DTMF actions to be performed by all conference participants or by
chairperson only are configured in the Conference IVR Service assigned to the conference.
For more information, see the RealPresence Collaboration Server (RMX) 1500/2000/4000
Administrator's Guide for Maximum Security Environments, "Defining a New Conference IVR
Service" on page 12-9.
To use the DTMF codes to control the conference, the DTMF input must be first enabled on
the endpoint remote control (for example, entering #).
Polycom, Inc.
Repeated presses of the
series of four-square layout options:
In any multi-square layout, pressing
window.
In full view, pressing
In any video layout, pressing
The following table summarizes the Video Layout options available via Click&View.
Table 2-8 Video Layout Options
DTMF Code
1
2
3
4
5
6
8
9
key, within eight seconds, cycles through the following
forces the current speaker to the top left
forces the next participant to full view.
reverts to the conference layout.
Layout Options
Chapter 2-Basic Operation
2-43