Procedure 2; Set The Rmx To Non Secure Communication Mode - Polycom Collaboration Server (RMX) 1500 Deployment Manual

RealPresence Collaboration Server (RMX) 1500/2000/4000 Deployment Guide for Maximum Security Environments

Procedure 2

Use this procedure if the RMX Web Client cannot connect to the RMX after
using Procedure 1.
Step 1: Set the RMX to Non Secure Communication Mode - See "Set the RMX to Non Secure
Communication Mode" on page 3-2.
Step 2: Create/Purchase a Certificate - see "Create/Purchase a Certificate" on page 3-3.
Step 3: Install the RMX Certificate - see "Install the RMX Certificate" on page 3-6.
Step 4: Set the RMX to Secure Communication Mode - see "Set the RMX to Secure
Communication Mode" on page 3-6.
Step 5: Reset the RMX - see "Reset the RMX" on page 3-7.
Step 6: Install the RMX Manager - see "Install the RMX Manager:" on page 3-7.

Set the RMX to Non Secure Communication Mode

1
2
3
4
5
3-2
In the RMX Management pane, click IP Network Services.
In the IP Network Services list pane, double click the Management Network entry.
The Management Network Properties dialog box is displayed.
Click the Security tab.
Clear the Secured Communication check box.
Click OK.
Polycom, Inc.