Table of Contents
Advertisement
14 Re-enter the old password in the Password field
15 Enter a Strong Password in the New Password field.
16 Re-enter the Strong Password in the Confirm New Password field.
17 Click Login.
Procedure 5: Enable Secured Communication
If the ULTRA_SECURE_MODE System Flag is set to YES, a valid TLS certificate must be
installed, and a secured connection between the RMX Web Client (or RMX Manager) and the
RMX unit must be defined.
•
•
•
•
Polycom, Inc.
— Two additional fields are displayed:
•
New Password
•
Confirm New Password
If the value of the ULTRA_SECURE_MODE System Flag is YES, only TLS mode connections
are permitted. If the Management Network Service has not yet been configured to be secured,
an Active Alarm is created and a message is displayed stating that Secured Communications
Mode must be enabled. For more information, see the RealPresence Collaboration Server
(RMX) 1500/2000/4000 Administrator's Guide for Maximum Security Environments "Secure
Communication Mode" on page F-1.
If the ULTRA_SECURE_MODE System Flag is set to YES and the Management Network
Service has not yet been configured to be secured, an Active Alarm is created and a
message is displayed stating that Secured Communications Mode must be enabled.
If the ULTRA_SECURE_MODE System Flag is set to YES and Secured Communications
Mode is enabled, the user is not able to disable Secured Communications Mode. An error
message is displayed stating that Secured Communications Mode cannot be disabled
while in Ultra Secure Mode.
TLS private keys saved by the current version when the ULTRA_SECURE_MODE
System Flag is set to YES are not compatible with TLS private keys saved by previous
RMX versions. An Active Alarm is created and a message is displayed requesting that a
new TLS certificate be installed.
TLS private keys saved by the current version will be compatible with TLS private keys
saved by future RMX versions.
Chapter 1-First Time Installation and Configuration
1-47
Advertisement
Table of Contents
