Table of Contents
Advertisement
14 In the Reset Confirmation dialog box, click Yes.
System restart may take up to five minutes.
15 On the workstation that was connected to the RMX in Step 13, start the RMX Web Client
16 Connect to the RMX. See "Connecting to the RMX" on page 1-46.
Procedure 8: Configure 802.1x Authentication
802.1x Authentication must be enabled for each Network Interface Controller (NIC).
To enable 802.1x Authentication:
1
2
Polycom, Inc.
application:
a
In the browser's address line, enter the Control Unit IP Address in the format:
https://<Control Unit IP Address>
b
Press Enter.
In the RMX Menu, click Setup > Ethernet Settings
The Ethernet Settings dialog box is displayed.
For each NIC, modify the Ethernet Settings table fields as set out in Table 1-19.
Table 1-19
802.1x Authentication - Configuration
Field
802.1x Authentication
.
For each NIC, click the arrow to open the drop-down menu and
select the 802.1x Authentication method:
•
EAP-TLS
•
PEAPv0
Note: EAP-MD5 and MSCHAPv2 are also available as options.
Selecting Off disables 802.1x Authentication.
Chapter 1-First Time Installation and Configuration
Description
1-61
Advertisement
Table of Contents
