Aaa/Radius/Hwtacacs Configuration Examples - 3Com Switch 4800G 24-Port Configuration Manual

776 C 53: AAA/RADIUS/HWTACACS C
HAPTER
Displaying and
Maintaining HWTACACS
AAA/RADIUS/HWTAC
ACS Configuration
Examples
AAA for Telnet Users by
a HWTACACS Server
ONFIGURATION
To do...
Clear buffered
stop-accounting requests that
get no responses
Clear the statistics on the local
server
To do...
Display configuration
information or statistics of the
specified or all HWTACACS
schemes
Display information about
buffered stop-accounting
requests that get no
responses
Clear HWTACACS statistics
Clear buffered
stop-accounting requests that
get no responses
Network requirements
As shown in Figure 233, configure the switch to use the HWTACACS server to
provide authentication, authorization, and accounting services to login users.
The HWTACACS server is used for authentication, authentication, and accounting.
Its IP address is 10.1.1.1.
On the switch, set the shared keys for authentication, authorization, and
accounting packets to expert. Configure the switch to remove the domain name
from a user name before sending the user name to the HWTACACS server.
On the HWTACACS server, set the shared keys for packets exchanged with the
switch to expert.
Use the command...
reset stop-accounting-buffer
{ radius-scheme radius-server-name |
session-id session-id | time-range
start-time stop-time | user-name
user-name }
reset local-server statistics
Use the command...
display hwtacacs
[ hwtacacs-server-name [ statistics ] ]
display stop-accounting-buffer
hwtacacs-scheme
hwtacacs-scheme-name
reset hwtacacs statistics { accounting
| all | authentication | authorization }
reset stop-accounting-buffer
hwtacacs-scheme
hwtacacs-scheme-name
Remarks
Available in user
view
Available in user
view
Remarks
Available in any
view
Available in any
view
Available in user
view
Available in user
view