Verifying The System Time Settings - Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual

Basic software procedures
▶ Select the status menu of the desired component:
▶ Select CPU Status for CPUs.
This option is only available for multi-processor systems.
▶ Select Memory Status for memory modules.
▶ Select PCI Status for expansion cards.
▶ Reset replaced components to Enable.
▶ Save your changes and exit the BIOS.
For more information on how to access the BIOS and modify settings,
see the corresponding BIOS Setup Utility reference manual.
5.3.8

Verifying the system time settings

This task only applies to Linux and VMware environments.
After the system board has been replaced, the system time is set automatically.
By default, the RTC (Real Time Clock) time standard is set as the local time.
If a Linux/VMware OS is used and the hardware clock has been configured as
UTC (Universal Time, Coordinated) in the OS, the BMC local time may not be
mapped correctly.
▶ After replacing the system board, ask the system administrator whether the
RTC or UTC time standard is to be used as system time.
If the system time (RTC) is set to UTC, the SEL (System Event Log)
time stamps may differ from the local time.
▶ Enter the BIOS.
▶ Select the Main menu.
82 Upgrade and Maintenance Manual RX1330 M5