2. Press
-
-
When the drive finishes a successful IPL:
• The
• The display shows * (an asterisk).
• The drive is now in the online state.
Place the Drive Offline
By default, the drive is in the online state following a successful IPL. To change
the drive state to offline:
1. Cease all I/O activity from the host.
2. Press the
The display shows Online, indicating the current state of the drive.
3. Press
The display shows Offline, indicating a successful transition.
Note: While the drive is offline, other menu options are available. Refer to
4. Press
5. Press
Note: If Exit Menu? is selected, the display shows Offline,
Place the Drive Online
To change the drive state back to online:
1. Press
The display shows Offline, indicating the offline state of the drive.
2. Press
The display shows Online, indicating a successful transition.
3. Press
4. Press
95741
.
IPL
The
indicator flashes.
power
The display shows various messages indicating that the IPL is
proceeding. These messages require no action on your part.
indicator is on steadily.
power
switch.
Menu
to place the drive offline.
Select
Chapter 6, Menu System
until the display shows Exit Menu?.
Menu
to exit, or
Select
Menu
alternating with the normal message, as a reminder that the drive is
in the offline state.
.
Menu
Select
to place the drive online.
until the display shows Exit Menu?
Menu
to exit, or
Select
Menu
Sixth Edition
for additional instruction.
to repeat Online/Offline selection.
to repeat the Online/Offline selection.
Basic Operations
4-3