Install And Lock; Figure 5-23. Mud Screw In Csl - StorageTek 9840 Product Manual

Install and Lock

Follow these instructions to properly install and lock the shipping insert into a
CSL. Before you can lock the shipping insert into the CSL, you must use the
MUD screw
brush within the drive.
CAUTION:
If the shipping insert is not locked into the tape drive, the drive head will
become damaged in shipment.
Notes:

Figure 5-23. MUD Screw in CSL

1. MUD screw
2. Input bin
3. Feed channel
95741
(Figure 5-23) to raise the reel motors and to lower the cleaning
• Only use the MUD mechanism to reset the drive for shipping.
• The MUD screw must be turned CCW to reset the drive to its
shipping position and to install and lock the shipping insert into the
drive.
3
2
Sixth Edition
Shipping Insert
1
C53667
5-37