Desktop Units; Desktop Drive Shipping Insert; Csl Shipping Insert - StorageTek 9840 Product Manual

Desktop Units

This section provides the installation procedure for the 9840 Tape Drive
desktop configuration. A desktop configuration contains either a manual mount
drive or a CSL. Fibre Channel or SCSI interfaces are available.
This section contains the following desktop procedures:
•

"Desktop Drive Shipping Insert"

• "CSL Shipping Insert" on page 3-20
• "Install Host Interface Cables" on page 3-21
• "Power-On Desktop/CSL" on page 3-25
Desktop Drive Shipping Insert
Use the instructions below to remove the shipping insert from the drive:
Note: See
1. Remove the shipping insert from the drive.
a. Squeeze both sides of the handle together.
b. Pull the shipping insert out from the drive.
1
2. Store the shipping insert.
Note: The shipping insert should be installed in the drive whenever the Desktop Unit is
returned to StorageTek for any reason.
95741
"CSL Shipping Insert" on page 3-20
insert.
C53520
Sixth Edition
to remove the CSL shipping
1. Shipping insert
Desktop Units
3-19