Secure Tray and Remove Shipping Insert
The instructions in this section describe how to secure trays to the rack and
remove the shipping insert from the drive cartridge aperture. CSL instructions
begin on
Drive Tray
Use the instructions below to secure a drive tray to the rack, apply the
decorative front cover, and remove the shipping insert:
1. Secure drive tray to rack with four 10-32 screws.
1
2. Install the drive tray decorative cover.
Note: If cover does not fit, reposition the slide-rail assembly.
1
95741
page
3-43.
C53261
C53262
Sixth Edition
1. Drive tray mounting screws (4)
1. Decorative cover
Rack-mountable Tray
3-41