Table of Contents
Advertisement
Safety and Handling
This chapter covers topics that are essential to all installation and service
activity:
•
•
•
Read the following pages and become familiar with these guidelines before
beginning any service activity.
Safety Precautions
CAUTION:
Potential injury: On-the-job safety is very important; therefore, observe
the following safety precautions while you are engaging in any
maintenance activity. Failing to follow these precautions could result in
serious injury.
Remove all conductive jewelry, such as watches and rings, before you
service powered-on equipment.
• Avoid electrical shock. Be careful when you work near power
• Power off the equipment that is being serviced before you remove a
• Ground all test equipment and power tools.
• Lift objects properly; read the information in
• Do not remove, cut, or relocate any floor tiles indiscriminately. Before
• Enforce good housekeeping practices in the equipment area to help
95741
"Safety Precautions"
"Electrostatic Discharge (ESD) Damage Prevention" on page 2-3
"Fiber Optic Safety" on page 2-5
connectors and supplies.
field replaceable unit (FRU) or other component. Remember that
dangerous voltages could still be present in some areas even though
power is off.
below).
you manipulate floor tiles, be sure that you understand the customer's
environment and receive the customer's approval. Remember, each
situation is different.
prevent accidents or fire.
Sixth Edition
2
"Lifting Techniques"
(see
2-1
Advertisement
Table of Contents
