Table of Contents
Advertisement
Table 6-1. Menu Table—Fibre Channel Configuration (Continued)
Options
Notes
Port A/B Custom/Normal WWN Submenu
Note: This submenu only appears if a Custom WWN is in use, or is being created.
Custom is default selection.
WWN Custom
Normal selection recalls the
WWN Normal
stored Normal WWN from the
drive EEPROM.
Currently, a password (use 500) is
required to save a new Custom
WWN, or to reset a Custom WWN
back to the stored Normal WWN.
Password requirement will not be
in future firmware releases.
Note: If valid Password is not entered, change to the WWN will not be saved.
Port B Attributes Submenu
View or change Port B attributes
Cfg PrtB ?
as defined in the preceding Port
A/B Attributes Submenus, starting
on
Tape Bar Submenu
Selects a barchart that displays
Tape Bar Y
how much tape is written and
how much tape has been read.
Deselects the barchart display.
Tape Bar N
See
additional information.
Note: Manufacturing ships drive with the Tape Bar N option selected
Language Selection Submenu
Defaults to last saved selection.
Selects display language:
Language ?
English, Espanol, Francais,
Italiano, or Deutscher.
Note: Manufacturing ships drive with the English option selected
95741
page
6-14.
"Tape Bar" on page 1-14
Sixth Edition
Fibre Channel Change Configuration
Procedure
1. Press
Menu
WWN, and advance to the next
submenu; or
2. Press
Select
then, press
Menu
the stored Normal WWN, and
advance to the next submenu.
1. Press
Select
Port A/B Attributes submenus, or
2. Press
Menu
1. Press
Menu
2. Press
Select
then, press
Menu
advance to the next submenu.
for
1. Press
Menu
2. Press
Select
is displayed; then, press
set, and advance to the next
submenu.
to invoke a Custom
,
to toggle option;
to reset WWN to
(Yes) to enter the
(No) to bypass.
to bypass, or
to toggle option;
to set, and
to bypass, or
until desired option
to
Menu
6-17
Advertisement
Table of Contents
