Menu Operations; Online Main Menu Operation - StorageTek 9840 Product Manual

Menu Operations

Menu Operations
Menu operations for Online and Offline are very similar. Online menus only
provide viewing of current settings and/or status. Offline menus allow option
selections and/or change to various settings. In both menu systems, press
to toggle/increment options, or to answer "Yes". Press
next menu, or to answer "No".

Online Main Menu Operation

When the drive is Online, the main menus shown on
are active. With Online selected, press
the View Configuration (View CFG ?) Main Menu, where you will have two
choices:
• Press
current drive configuration settings.
• Press
Notes:
The view-only Firmware Release Main Menu displays the drive's firmware code
release level in the following format: Rx.yy.zzzc; where x = major revision level,
y = minor revision level, z = integration number, and c = channel interface
type (f for Fibre Channel, and s for SCSI).
When a 9840 drive is installed in a CSL, the view-only CSL Firmware Release
Main Menu displays the CSL's firmware code release level in the following
format: CSL x.y.zz; where x = major revision level, y = minor revision level, and
z = integration number. CSL None is displayed when the drive is not installed
in a CSL.
The Main Exit Menu (Exit Menu?) allows choice of exiting menu system by
pressing
pressing
6-4
(Yes) to view configuration submenus which display the
Select
(No) to bypass, and advance to the next main menu.
Menu
1. Fibre Channel interface drives provide for Port A and B Enable/
Disable selection before the View Configuration Main Menu
appears.
2. The View Configuration submenus vary slightly relative to specific
interface type.
(Yes); or, looping back to the Online/Offline Main Menu by
Select
(No).
Menu
Sixth Edition
Menu
Figure 6-3 on page 6-5
(one or more times) to advance to
Menu
Select
to advance to the
95741