Csl In Automatic Mode; Figure 5-15. Priority Mount Cartridge - StorageTek 9840 Product Manual

Note: If the cartridge is not inserted into the CSL feed channel properly
3. Check to ensure the
4. Press the
flashing

Figure 5-15. Priority Mount Cartridge

1. Cartridge
2. First index rod
3. Cartridge stop mechanism

CSL in Automatic Mode

The automatic mode is used for sequential mounting of cartridges from the
input bin into the drive. When the CSL is in the automatic mode and the drive is
not loaded, follow these procedures to load a priority cartridge:
1. If there are no cartridges in the input bin, the
signal you to insert a priority (single) cartridge into the feed channel. Press
the
2. If the input bin is not empty, the mode must be changed to manual mode to
mount the priority cartridge. This prevents the next cartridge from being
automatically loaded.
Note: Refer to
95741
(Figure 5-15), the CSL cannot insert the cartridge into the drive slot.
operator
switch to feed the cartridge into the drive and to clear the
Start
indicator.
operator
3
switch to resume CSL operation.
Start
Figure 5-15 to correctly load a cartridge into the feed channel
Sixth Edition
indicator is flashing.
1
2
C53665
operator
Modes of Operation
indicator flashes to
5-21