Table of Contents
Advertisement
Drive Operations Menu
Table 6-3. Menu Table—Drive Operations (Continued)
Options
Notes
Servo Load/ Unload Diagnostic Submenu
Servo Load/ Unload Diagnostics
SrvoLdUnld
test the drive servo load/unload
function.
A tape cartridge, if present,
ejects when this option is
selected.
Make sure a scratch tape
cartridge is available. Tape
cartridge loading is required for
the diagnostic, but the tape
media is not used.
TestSrvLdU displays during
the approximately 1 minute
routine
(10 load/unload cycles).
If CHK xxxx displays, see FSC
Dictionary for information.
Exit Drive Submenu
This submenu allows you to
Exit Drv ?
exit Drive Operations, or to
repeat the drive operations
submenus.
6-40
Procedure
1. Press
2. Press
3. When LdScrtchTp displays, insert
known good scratch tape cartridge.
4. If a diagnostic error FSC displays,
press
5. When the tape ejects, press
advance to the Exit Drive submenu;
or, reinsert tape cartridge to repeat.
1. Press
Operations, or
2. Press
the Code Update Submenu.
Sixth Edition
to bypass, or
Menu
to activate.
Select
to clear.
Unload
Menu
(Yes) to exit Drive
Select
(No) to loop back to
Menu
to
95741
Advertisement
Table of Contents
