Table of Contents
Advertisement
Fibre Channel Change Configuration
Table 6-1. Menu Table—Fibre Channel Configuration (Continued)
Options
Notes
Library Address Submenu
Defaults to last saved selection.
Lib Adr xy
Pressing
characters are steady, starts the
change mode. The x character
begins flashing and will
increment up, one value with
each additional press of
Pressing
character at displayed value (0-F),
and advances to the y character.
For 9738 libraries, the addresses
of all drives stay at the factory
preset (FF).
Note: Manufacturing ships drives with Lib Adr FF selected.
CSL Power On Mode Submenu
Defaults to last saved selection.
Selects the default operation of
the CSL when powering on:
• CSL System allows the host
CSL System
• CSL Auto allows the CSL to
CSL Auto
• CSL Manual allows manual
CSL Manual
Note: Manufacturing ships drives with CSL Auto option selected.
6-20
when both
Select
Select.
sets flashing
Menu
to control the CSL.
operate automatically.
operations only.
Sixth Edition
Procedure
1. Press
to start change mode;
Select
or, press
to bypass.
Menu
2. Press
to increment
Select
until desired value is displayed,
then press
to set.
Menu
3. Repeat step 2 for y character.
4. Press
to advance to the next
Menu
submenu; or, press
restart change mode.
1. Press
to bypass, or
Menu
2. Press
until desired option
Select
is displayed; then, press
set and advance to next
submenu.
to
Select
to
Menu
95741
Advertisement
Table of Contents
