Overview
The CSL is an electromechanical device that can load and unload up to seven
cartridge tapes. It also has a priority feed slot (open area of feed channel) to
mount a priority cartridge into the tape drive.
Component Locations
Refer to
locations of the CSL components. Operators should become familiar with the
CSL components listed below.
Note: The CSL desktop and the rack-mountable 19 inch tray unit
Table 5-1. CSL Component Descriptions
Component
Operator Panel Operates the 9840 Tape Drive and CSL
Output Bin
Feed Channel
Input Bin
Figure 5-2. CSL Component Locations
1. Input Bin
2. Operator Panel
3. Output Bin
4. Feed Channel
The client-server CSL desktop and the rack-mountable version use Fibre
Channel and SCSI interfaces. The interface cable, power cord, and power
switch are located on the rear of the unit.
rack mount CSL.
5-2
Table 5-1
for CSL component descriptions and to
on page
5-1) components and locations are identical.
Purpose
Houses ejected cartridges from the feed channel
Inputs/outputs cartridges to/from 9840 Tape Drive and also
used for priority mounts
Loads cartridges into the feed channel
4
3
2
Sixth Edition
Figure 5-2
1
C53657
Figure 5-5 on page 5-6
for
(Figure 5-1
illustrates the
95741