Table of Contents
Advertisement
Jammed Cartridge
Jammed Cartridge
A jammed cartridge in a CSL is not a common malfunction. A jammed cartridge
unloads from the drive and remains on the feed roller
eject fully into the feed channel.
You must know how to remove jammed cartridges when the malfunction
occurs. Follow the procedures in this section to remove a jammed cartridge.
See
Figure 5-21
MUD screw is located to the right of the feed channel.
Notes:
.
Figure 5-21. 9840 Tape Drive Manual Unload Device
1. MUD screw
2. Input bin
3. Feed channel
5-30
for the CSL manual unload device (MUD) screw location. The
• Only use the MUD mechanism to remove jammed cartridges
(cartridges still in the 9840 Tape Drive) or to reset the drive for
shipping (cartridges not on the feed roller).
• The MUD screw must be turned clockwise (CW) to remove jammed
cartridges.
• The MUD screw must be turned counterclockwise (CCW) to reset
the drive to its shipping position and to install and lock the shipping
insert into the drive.
3
2
Sixth Edition
(Figure
5-21). It does not
1
C53667
95741
Advertisement
Table of Contents
