Table of Contents
Advertisement
Menu Operations
Menu Operations
You may view online menus and offline menus. However, operators should
only view online menus. Offline menus are for configuration and should only
be used by qualified technicians.
menus online only.
menus.
WARNING:
Changing configurations may disable drive communication to the host.
Only qualified technicians should change any configurations.
Online Menus
When the drive is online and the VIEW CFG? submenu is invoked, the current
configuration settings are displayed.
overview of the information available in this submenu.
Note: The information in this submenu is display only.
Specific information for online menus is also available as follows:
• Fibre Channel Menus in
• SCSI Menus in
• ESCON Menu in
Offline Menus
When the drive is offline, the menus shown in
available.
WARNING:
Offline menus are for qualified technicians only. Operators should not
access offline menus.
• The CHG CFG? submenu enables you to change configuration options. The
options vary depending on the type of channel interface in the drive.
• The DRV MENU? submenu allows you to IPL from tape, create a dump tape,
create a code tape, or create a data tape. See the menu tree
page
4-4
Figure 4-4 on page 4-6
Figure 4-5 on page 4-7
Figure 4-6 on page 4-10
Figure 4-7 on page 4-13
4-16) for additional information.
Ninth Edition
Figure 4-3 on page 4-5
provides offline configuration
Figure 4-3 on page 4-5
Figure 4-4 on page 4-6
provides viewing
provides an
are
(Figure 4-8 on
95739
Advertisement
Table of Contents
