StorageTek 9840 Product Manual page 170

Fibre Channel Change Configuration
Table 6-1. Menu Table—Fibre Channel Configuration (Continued)
Options Notes
Compress Mode Submenu
Defaults to last saved selection.
When Yes is selected, data is
Cmprss Yes
compressed, by default. Host can
request no data compression.
When Off is selected, data is not
Cmprss Off
compressed, and host request has
no effect.
When No is selected, data is not
Cmprss No
compressed, by default. Host can
request data compression.
Note: Manufacturing ships drive with the Cmprss Yes option selected.
Data Security Erase Mode Submenu
Defaults to last saved selection.
Full DSE Y writes a random
Full DSE Y
binary pattern on the media,
over-writing existing data, from
the point of an "Erase" command,
to the End of Tape.
Full DSE N writes data on the
Full DSE N
media that indicates valid data
does not exist beyond the point
of an "Erase" command.
Note: Manufacturing ships drive with the Full DSE Y option selected.
Port A Attributes Submenu
View or change Port A attributes
Cfg PrtA ?
as defined in the Port A/B
Attributes Submenus.
Port A/B Hard Physical Addressing Submenu
Defaults to last saved selection.
PA N uses a new physical
Hard PA N
address each time.
PA Y uses same assigned
Hard PA Y
physical address each time.
Note: Manufacturing ships drive with Hard PA N option selected.
6-14
Procedure
1. Press
2. Press
option is displayed; then, press
Menu
submenu.
1. Press
2. Press
then, press
advance to next submenu.
1. Press
Port A/B Attributes submenus, or
2. Press
1. Press
2. Press
then, press
advance to next submenu.
Sixth Edition
to bypass, or
Menu
until the desired
Select
to set, and advance to next
to bypass, or
Menu
to toggle option;
Select
to set, and
Menu
(Yes) to enter the
Select
(No) to bypass.
Menu
to bypass, or
Menu
to toggle option;
Select
to set, and
Menu
95741