Table of Contents
Advertisement
Dislodge a Stuck Tape
Table 7-2. Error Displays and Instructions (Continued)
This is displayed while saving
SavingDump
the dump to EEPROM.
Initialization started.
Start Init
The boot is trapped in a
Trapped
closed loop.
The tape cartridge is being
Unloading
unloaded.
The
UnWr(xxxx)
pressed while a write was
taking place.
The drive or CSL attempted to
Write Prot
write to a write-protected
tape.
A VolSafe tape is loaded and
the operator is trying to make
a dump, code, or data tape,
or build an MIR.
The drive or CSL is in write
Writing
mode.
7-8
switch was
Unload
Sixth Edition
This is the normal display.
Wait for the dump to complete.
No action necessary.
If the IPL does not clear the condition,
replace the drive or CSL.
No action necessary.
Go to
"UnWr xxxx Indication" on
page
7-12.
Change the switch on tape cartridge to
write-enable.
Remove VolSafe tape and insert a standard
cartridge.
No action necessary.
95741
Advertisement
Table of Contents
