Recovery Process - StorageTek 9840 Product Manual

Recovery Process

1. Remove the incorrectly loaded cartridge:
a. Press down on the cartridge stop mechanism
b. Grasp the cartridge and pull it from the feed channel.
2. Clear the CSL error.
a. Press the
b. After the
3. Ensure all remaining cartridges to be loaded are placed within the input bin
correctly (cartridge reels to the right).
4. The CSL is now ready for normal operations.
95741
page 5-24).
switch
Start
operator indicator.
switch is pressed, the
Start
operator display still shows LOAD 4E04 until a successful load or you
press the switch
Unload
Sixth Edition
(Figure 5-17 on page 5-23) to clear the solid
operator
(Figure 5-18 on page
Error and Recovery
(Figure 5-18 on
indicator blinks and the
5-24) to clear the display.
5-25