Csl Switches; Table 5-4. Csl Operator Panel Switches - StorageTek 9840 Product Manual

CSL Switches

Refer to
Note: Refer to

Table 5-4. CSL Operator Panel Switches

Switch
Switch
Start
(CSL only)
Autoload Mode
Switch
(CSL only)
95741
Table 5-4 for CSL operator panel switch descriptions.
"Operator Panels" on page 1-7
Drive switches.
Description
Pressing this switch restarts CSL operation after the operator empties a
full output bin or replenishes an empty input bin.
Also used to restart CSL operation after clearing a misfed cartridge.
Notes:
1. Remove the cartridge before pressing the
2. Press the
Start
solid
operator
twice re initializes the CSL.
Pressing this switch changes the operation of the CSL to one of three
modes: System, Automatic, or Manual.
Notes:
1. Select the mode of operation by using the
switch.
2. Press the
Start
The CSL powers on in the default mode selected in the drive
configuration menu. The default mode is overridden when the switch is
used to select a new setting. The CSL remains in the selected mode
while the drive is powered on. This does not change the IPL default
mode in the drive configuration menu.
• System allows host to control CSL.
• Auto allows CSL to operate automatically.
• Manual allows manual operations only.
Sixth Edition
for explanation of the 9840 Tape
switch twice when there is a load failure or
indicator (red) on the CSL. Pressing the switch
switch to set the mode of operation.
Operator Panel
switch.
Start
Autoload Mode
5-9