Table of Contents
Advertisement
9738 Library Attachment
3. Set the drive tray onto the bottom edge of the drive slot.
Note: The first drive is placed in the bottom slot position. See figure.
4. Push the tray fully into the drive slot.
3
2
1
CAUTION:
If the tray is not fully tightened, the library may not be able to calibrate the drive(s).
5. Turn the tray latch to the right (clockwise) until tight (see figure).
Note: You should test the drive tray for play by grasping it and pulling back. If you feel
any looseness, retighten the tray latch.
6. Repeat Steps 1 through 5 for all remaining drives.
1
3-10
1. Drive 0
2. Drive 1
3. Drive 2
C53248
1. Tray latch
E53369
Sixth Edition
95741
Advertisement
Table of Contents
