Releasing a call
There are different methods for releasing a call. These methods will work only if the
Release feature has been administered for your station.
Steps for releasing a call
To release a call:
1. Do one of the following actions:
While on an active call, select the Release button that is located on the Call
●
Information Panel (CIP). You will not hear a dial tone after you select the Release
button.
Select the Release button that is located on the Phone Button toolbar.
●
If you are using an Avaya CallMaster VI, press the Release button on the
●
telephone.
If you are using Telecommuter or IP Telephone configuration, you may hang up the
●
handset.
Select the Release item in the Phone Features window.
●
2. If you have a call on hold, you must first reconnect to it before you can release the call.
In the example below, you would have to reconnect to extension 1048 before you
could release it.
Issue 1.1 August 2004
135